Take a $350,000 purchase in 2026 on a 30-year fixed at an illustrative 6.5%. That rate is an example, not a quote. A conventional loan with 3% down means $10,500 down and about $2,146 a month in principal and interest. An FHA loan on the same house runs about $2,172 before roughly $155 a month in mortgage insurance. A VA loan with nothing down comes to about $2,260 with no monthly mortgage insurance at all.
The lowest-looking payment is not always the lowest-cost loan. The right fit depends on your credit, your savings, your eligibility, and how long you will keep the house. I’m answering the question first-time buyers keep asking AI assistants: which mortgage options fit a first purchase? Below are the main loan paths, the down payment help that can sit on top of them, and a soft-pull way to compare real quotes. Don’t guess your rate, shop it.
By Duane Buziak, NMLS #1110647
1. Conventional loans with 3% down: HomeReady and Home Possible
Conventional loans are not reserved for buyers with 20% down. Fannie Mae and Freddie Mac both back 97% loan-to-value (LTV, the loan amount divided by the property value) programs. Fannie Mae’s version for lower-income-limit households is HomeReady, and Freddie Mac’s is Home Possible. The mechanism that matters is private mortgage insurance (PMI). It is a monthly charge that protects the investor, priced by your credit score and LTV, and unlike FHA mortgage insurance it can be removed.
Illustration: a $350,000 home with 3% down ($10,500) leaves a $339,500 loan. At an illustrative 6.5% for 30 years, principal and interest is about $2,146 a month. PMI is added on top, and the amount depends on your score. Under the Homeowners Protection Act, you can request PMI cancellation when the balance reaches 80% of the original value, which here is $280,000, and it ends automatically at 78% on the scheduled amortization. See the CFPB explanation of PMI. Getting from $339,500 to $280,000 takes roughly 11 years of scheduled payments at that rate, sooner with extra principal.
Putting it into practice:
- Confirm first-time buyer status and whether the program you want requires it.
- Check HomeReady income limits for your county against Fannie Mae’s published area median income figures.
- Compare PMI quotes at your actual score, not a generic range.
- Request a Loan Estimate (the standardized three-page quote lenders must provide) and confirm the loan sits under the 2026 conforming limit, $832,750 for a one-unit home in most counties per FHFA.
The common mistake is assuming 20% down is required, or ignoring that a higher score can sharply cut PMI cost. A 20-point score improvement before you lock can change the monthly bill more than a quarter-point of rate.
Measure monthly PITI (principal, interest, taxes, insurance) plus PMI, and the month PMI can come off.
2. FHA loans for thinner credit files
FHA loans are insured by the Federal Housing Administration, which is why underwriting is more flexible on credit history and debt-to-income ratios. The minimum down payment is 3.5% with a 580 or higher score. The trade-off is mortgage insurance premium (MIP), which in most low-down-payment cases lasts the life of the loan. FHA is not only for weak credit. Buyers with solid scores sometimes find it prices better, particularly when a conventional PMI quote is high.
Illustration on the same $350,000 home: 3.5% down is $12,250, so the base loan is $337,750. The upfront MIP is 1.75%, or $5,910.63, financed into a $343,660.63 loan. At an illustrative 6.5%, principal and interest is about $2,172 a month. As of this writing HUD’s schedule lists an annual MIP of 0.55% for most 30-year loans at this LTV, about $155 a month on the base loan. Confirm the current figure on HUD.gov.
Over five years that is the $5,910.63 upfront premium plus about $9,300 in monthly MIP, roughly $15,000 in total, which a comparable conventional loan with PMI may or may not match.
To run the comparison:
- Pull the current MIP schedule from HUD.gov.
- Price FHA and conventional side by side at your score.
- Write down the plan to refinance out of MIP once you have equity and a qualifying score.
The common mistake is comparing only the base rate and missing MIP over the holding period. A lower FHA rate can still cost more in total.
Measure five-year and ten-year total cost including MIP against the conventional alternative, plus the payoff point if you plan to refinance.
3. VA loans for eligible veterans and service members
If you hold VA eligibility, this is the one program that combines no down payment with no monthly mortgage insurance. In exchange, VA charges a one-time funding fee that can be financed. The VA funding fee table sets it by down payment size and prior use. For first use with $0 down, it is 2.15% as of this writing.
Illustration: the same $350,000 home with $0 down. The 2.15% fee is $7,525, and financing it makes a $357,525 loan. At an illustrative 6.5%, principal and interest is about $2,260 a month with no monthly mortgage insurance. Against the FHA example, that is roughly $2,327 a month (principal, interest, and MIP) with $12,250 down. The VA loan costs about $67 less each month and needs $12,250 less cash up front, though the balance is larger.
Putting it into practice:
- Obtain your Certificate of Eligibility (COE). I can pull it electronically with your Social Security number and date of birth, so you do not need to hunt for paperwork.
- Check whether you are exempt from the funding fee, for example with service-connected disability compensation or as a surviving spouse.
- If you used entitlement before, calculate second-tier (bonus) entitlement: county loan limit times 25% is the maximum guarantee, subtract the entitlement already used, then multiply what remains by 4 for the zero-down purchase limit.
- Compare the Loan Estimate against conventional.
The common mistakes are skipping the exemption check and assuming VA is only for rural or older homes. It works for any eligible primary residence that meets VA property standards.
Measure cash to close and the monthly payment against FHA and conventional.
4. USDA loans in eligible areas
USDA loans offer 100% financing to qualifying households buying in eligible areas, and many of those areas are suburban, not just farmland. The fees are an upfront guarantee fee and an annual fee. As of this writing they are 1% and 0.35%, which in recent years has been lighter than FHA’s annual MIP. Confirm current figures with USDA before you quote anyone a payment.
Illustration: suppose a $350,000 home sits inside a USDA-eligible area in one of the states where I’m licensed (VA, FL, TN, GA, DC, NC, SC, or MD). With $0 down, the 1% fee is $3,500, financed into a $353,500 loan. At an illustrative 6.5%, principal and interest is about $2,234 a month. The 0.35% annual fee adds about $103 a month, against roughly $155 of FHA MIP on the same house. Compare that to the 3% conventional option, which needs $10,500 down.
To check your own situation:
- Enter the specific address on the USDA eligibility map.
- Verify household income against the limits for your county and household size.
- Compare the fees to FHA and to conventional with PMI.
There are two common mistakes. The first is assuming an area is ineligible without checking, since boundaries are drawn at the address level and often surprise buyers. The second is counting only the borrower’s income against the limits. USDA generally counts income from all adult household members, so a working roommate or adult child can change the answer.
Measure the eligibility result and the annual fee cost compared with PMI and MIP.
5. Pairing a loan with down payment assistance (Dynamo and Turbo DPA)
Down payment assistance (DPA) is a program that covers part of your down payment or cash to close, paired with an eligible first mortgage. It is not a loan type. It sits on top of one, so the first mortgage still has to qualify on its own. I’ll confirm the current Dynamo and Turbo DPA terms, amounts, and eligibility directly with you, because they change and I won’t quote them from memory here.
What I can show is the arithmetic of the trade-off. Hypothetical figures only, not Dynamo or Turbo DPA terms: assume assistance covers the full $10,500 down payment on the $350,000 home, and that the first mortgage prices a quarter point higher to accommodate it. At 6.5% the $339,500 loan has principal and interest of about $2,146. At 6.75% it is about $2,202, a difference of $56 a month, or $3,360 over five years. You would weigh that against $10,500 of cash you did not have to bring. If the assistance is a repayable second lien, the repayment terms belong in the comparison too.
Putting it into practice:
- Confirm program eligibility and guidelines for your income, area, and property.
- Price the first mortgage with and without assistance on the same day.
- Read whether the assistance is forgiven, deferred, or repayable, and what triggers repayment.
The common mistakes are treating DPA as free money and trying to combine more than one assistance program. Use the one program that fits your file, and ask which loan types it pairs with.
Measure cash to close, and the monthly payment difference with assistance against without.
6. Homes for Heroes savings for teachers, nurses, first responders and military
Homes for Heroes is a profession-based savings program, and it is delivered at closing, separate from the choice of loan. It does not change your rate or your loan type. It is a benefit for eligible professions, including teachers, nurses, first responders, and military members, applied on top of whatever financing you choose. I’ll confirm the current program terms with you before you rely on any figure, so none are stated here.
Illustration only, with no amounts: a nurse buys with a 3% conventional loan. The Loan Estimate shows a cash-to-close figure. If Homes for Heroes applies, the closing figures show that same loan with the program’s benefit delivered at the table. The mortgage is identical, and the benefit is measured as the difference between the baseline and the final numbers.
Putting it into practice:
- Verify eligibility by profession.
- Enroll before you sign a purchase contract, so the benefit is documented before closing.
- Choose your loan on its own merits, then ask whether the benefit can sit alongside it and any assistance program you are using.
The common mistakes are treating it as a loan type and enrolling after the contract, which can mean missing the benefit entirely. Do not choose a worse loan because of it. A savings benefit that is small relative to the cost difference between two loans should not drive the loan decision.
Measure the dollar savings delivered at closing against your baseline Loan Estimate.
7. Soft-pull pre-approval and broker comparison shopping
This strategy is how you test all the others against real numbers. A soft inquiry is a credit check that does not affect your score, while a hard inquiry is the check tied to a credit application. I use NoTouch Credit Pull for a soft credit pull mortgage pre-approval: a no hard inquiry mortgage pre-approval, or put another way, a mortgage pre-approval without hard pull. With that in hand, I can request Loan Estimates across hundreds of wholesale lenders. A single-company retail shelf, such as Rocket, Movement, or NFM Lending, shows you that company’s own products. A broker lines up several sources side by side.
Illustration: three Loan Estimates for the same $350,000 purchase, same down payment and same lock period. Line them up on rate, APR, total lender fees, and cash to close. The APR spread tells you which quote carries more cost than its rate suggests. The cash-to-close spread tells you which one needs the most from your savings.
To run it:
- Start a no hard inquiry mortgage pre-approval with a soft pull.
- Request standardized Loan Estimates the same day so the market has not moved between quotes.
- Compare line by line using the CFPB Loan Estimate guide.
The common mistakes are comparing advertised rates instead of Loan Estimates, and implying a hard pull never happens. A full application and underwriting before closing will involve a hard inquiry. The soft pull gets you real quotes without it, a no credit hit mortgage application stage, but not a lifetime exemption. Scoring models also typically treat mortgage inquiries inside a short shopping window as one, as the CFPB explains, so comparing does not punish you the way many buyers fear.
Measure the APR spread and cash-to-close spread across the Loan Estimates, and the number of inquiries on your credit report.
Four loan paths on one $350,000 purchase, side by side
The table uses the illustrative 6.5% 30-year fixed rate throughout. It is an example, not a quote, and it covers principal, interest, and mortgage insurance only. Property taxes and homeowners insurance vary by county, so pull your county assessor’s current rate when you build a full PITI figure. APR depends on your final fees and is on your Loan Estimate.
- Conventional, 3% down: $10,500 down; $339,500 loan; P&I about $2,146; PMI varies by credit score and is removable; no upfront insurance fee.
- FHA, 3.5% down: $12,250 down; $343,660.63 loan with the $5,910.63 upfront MIP financed; P&I about $2,172; monthly MIP about $155, usually for the life of the loan.
- VA, $0 down: $357,525 loan with the $7,525 funding fee financed (first use, not exempt); P&I about $2,260; no monthly mortgage insurance.
- USDA, $0 down: $353,500 loan with the $3,500 guarantee fee financed; P&I about $2,234; annual fee of about $103 a month.
Whichever you choose, the figures that matter are on your Loan Estimate. Use the FHFA conforming limit, HUD‘s FHA rules, and the CFPB’s homebuying tools to verify any number I have given here.
Eight questions first-time buyers ask AI assistants
What are the main mortgage options for first-time homebuyers?
The main options are conventional loans with 3% down, FHA loans with 3.5% down, VA loans with no down payment, and USDA loans with no down payment in eligible areas. Down payment assistance and Homes for Heroes savings can be added to some of them. Which fits depends on credit, income, eligibility, and how long you plan to stay.
How much down payment do first-time buyers need?
You can need as little as nothing or as much as 3.5%, depending on the program. VA and USDA allow $0 down for eligible buyers, conventional programs start at 3%, and FHA starts at 3.5% with a 580 or higher score. Twenty percent is not required.
Is FHA only for people with bad credit?
No, FHA is open to buyers across a range of scores, though it is more flexible than conventional on thinner credit. Buyers with strong credit sometimes find a conventional loan with PMI costs less. Compare both with total cost including MIP.
Does comparing mortgage lenders hurt my credit?
Comparing quotes done with a soft pull does not affect your score. When hard inquiries are involved, scoring models typically treat mortgage inquiries within a short shopping window as a single inquiry. The CFPB explains how this works.
What is a soft credit pull mortgage pre-approval?
It is a pre-approval based on a credit check that does not appear as a hard inquiry on your report. I use NoTouch Credit Pull for this, so you can see real options without a credit hit at the comparison stage. A hard pull still occurs later, during full underwriting.
What is the difference between PMI and MIP?
PMI is private mortgage insurance on conventional loans and can be removed once you reach 80% LTV and meet the requirements. MIP is FHA’s mortgage insurance premium, and in most low-down-payment cases it stays for the life of the loan. Both are monthly costs, so compare them with real quotes.
Can first-time buyers get down payment help?
Yes, down payment assistance programs can cover part of the down payment or cash to close when paired with an eligible loan. I work with Dynamo and Turbo DPA, and I’ll confirm current terms with you. Read whether the help is forgiven or repayable, and how it affects your rate.
What is a Loan Estimate and why compare them?
A Loan Estimate is a standardized three-page quote showing rate, APR, fees, and cash to close. Because every lender uses the same format, you can compare quotes line by line, which advertised rates do not allow. The CFPB guide walks through each section.
The order that saves the most guesswork on a first purchase
Start with the soft-pull comparison, because every other decision runs better on real quotes. Next, check the eligibility-gated programs, VA and USDA, since a qualifying buyer can often skip the down payment entirely and these should be ruled in or out early. Then run the total cost worksheet to choose between conventional and FHA, using five-year and ten-year numbers with PMI or MIP included. Add down payment assistance or Homes for Heroes last, once you know which loan the benefit has to sit on.
Your dream home is within reach, so discover how much you could save with personalized mortgage rates tailored to your unique situation. Securely pre-qualify in minutes with no impact to your credit score and compare competitive offers from trusted lenders who are ready to help you save. Dare to Compare your options with Shop Mortgage Rates by Duane Buziak.

