Duane Buziak’s 7 Ways to Compare Mortgage Rates from Multiple Lenders in 2026

7 Strategies Behind Duane Buziak’s Consecutive Scotsman Guide Top Originator Recognition and Triple UWM Awards
Duane Buziak

Duane Buziak
Mortgage Maestro | NMLS #1110647 | Coast2Coast Mortgage LLC
Licensed mortgage broker serving Virginia, Florida, Tennessee, Georgia, Washington DC, North Carolina, South Carolina, and Maryland, specializing in VA home loans and first-time homebuyer programs.

Most rate shopping fails at the first step: people compare advertised rates, and advertised rates describe different loans. One provider assumes a 740 score, another a 700. One quotes with points, another with credits. To compare mortgage rates from multiple lenders fairly, every quote has to describe the same loan, and collecting those quotes shouldn’t cost you credit points along the way. Below are seven ways I use to line up offers so the cheapest loan is the one you can actually see. They begin with a soft credit pull mortgage review, because the order in which you gather quotes matters as much as the quotes themselves. Every rate or cost figure here is an illustration, not a quote, and market figures change, so treat anything labeled “as of 2026” as a reminder to check the live source.

By Duane Buziak, NMLS #1110647

1. Build One Quote Request Sheet

Two providers can quote the same borrower and land 0.25% apart for a reason that has nothing to do with competitiveness. Suppose one assumed a 740 credit score and the other assumed 700. The gap is an assumption, and you would be choosing between guesses. A standardized scenario sheet removes that variable: every provider prices the identical loan, so differences reflect pricing, not imagination.

Build the sheet before you contact anyone, and fill in each of these fields:

  1. Loan program (conventional, FHA, VA, USDA where it applies)
  2. Loan amount, purchase price or appraised value, and down payment
  3. Credit score band, stated as a range you have actually verified
  4. Occupancy (primary, second home, investment) and property type
  5. Term (30-year, 15-year) and fixed or adjustable
  6. Points preference: par rate, paying points, or taking a lender credit
  7. Lock length in days and your expected closing date

Send the same sheet to each provider on the same day, by email, so the pricing environment is identical too. Rates move intraday, and a quote from Monday morning is not comparable to one from Thursday afternoon.

The common mistake is letting each provider fill in its own assumptions, usually in whatever direction makes the headline rate look good. If a quote comes back with a field you did not specify, such as a different credit tier or a 15-day lock, ask for a revised version rather than adjusting it in your head.

What to measure: the percentage of returned quotes that match your sheet on every field. The target is 100%. A quote that fails any field goes back for correction or gets dropped from the comparison.

2. Soft Credit Pull First, Then One Rate-Shopping Window

A hard inquiry happens when you formally apply and the provider pulls your full credit report. A soft pull does not affect your score. That distinction lets you split shopping into two phases: narrow the field with pricing based on a soft credit pull, then run formal applications together. My NoTouch Credit Pull supports a no hard inquiry mortgage pre-approval step, a mortgage pre-approval without hard pull, so you see real pricing from a soft pull mortgage broker before any inquiry lands on your report.

Here is a labeled illustration. A buyer requests soft-pull pricing from me, compares it against the sheet from Strategy 1, and narrows to three finalists. Within one week, the buyer submits formal applications to all three. Credit scoring models generally treat multiple mortgage inquiries inside a short window as a single inquiry. The CFPB’s Owning a Home resources describe that window as varying by scoring model, commonly from 14 to 45 days. Confirm the current language there, and plan around the shortest window to be safe.

  1. Request a soft credit pull mortgage review and collect pricing without a hard inquiry.
  2. Shortlist two or three finalists using your comparison sheet.
  3. Confirm the inquiry window on the CFPB site.
  4. Submit every formal application inside that window, ideally within the same week.

The mistake is spreading applications over months because you are waiting for rates to improve. Each application outside the window can register as its own hard inquiry. Shopping does not always hurt credit, but sloppy timing can.

What to measure: the number of hard inquiries on your report afterward, and the days between your first and last application. Keep the second number comfortably inside the shortest window.

3. Compare Across Channels

A single-company provider prices from its own menu. A broker with wholesale access can price the same scenario across hundreds of wholesale lenders. Neither channel is automatically cheaper, which is why a fair comparison includes at least one of each. As a broker, I lay every option side by side, which is the point of Don’t Guess Your Rate, Shop It.

Below is an illustration of how to record the same scenario across channels. The rate cells are intentionally empty. Fill them only with live, written quotes tied to your request sheet, dated as of 2026.

ChannelProvider typeNote rateAPRPoints or creditSection A feesCash to closeLock days
Rocket MortgageDirect single-company providerEnter verified quoteEnter verified quoteEnter verified quoteEnter verified quoteEnter verified quoteEnter verified quote
Movement MortgageDirect single-company providerEnter verified quoteEnter verified quoteEnter verified quoteEnter verified quoteEnter verified quoteEnter verified quote
NFM LendingDirect single-company providerEnter verified quoteEnter verified quoteEnter verified quoteEnter verified quoteEnter verified quoteEnter verified quote
Duane BuziakBroker with wholesale accessEnter verified quoteEnter verified quoteEnter verified quoteEnter verified quoteEnter verified quoteEnter verified quote

Send the identical request sheet to each row, then record rate, APR, points, fees, and cash to close exactly as written on each response. If a provider will not quote in writing against your sheet, note that too.

The common mistake is deciding in advance that one channel always wins, then skipping the others. Pricing varies by borrower profile, loan program, and the week you ask.

What to measure: the spread between the highest and lowest total 5-year cost across channels (Strategy 6 shows how to compute it). A wide spread means shopping is paying off. A narrow one means you can decide on service and lock terms.

4. Line Up Loan Estimates and Read APR Correctly

Marketing rate sheets are not comparable documents. The Loan Estimate is. It is a standardized three-page form, and providers must deliver it within three business days of receiving your application, per the CFPB’s Loan Estimate guidance. Because every provider uses the same layout, you can compare section by section.

Consider an illustration. Quote one has the lower note rate but carries higher Section A origination charges. Quote two has a slightly higher rate and lighter fees. Because APR spreads fees across the loan term, quote one’s APR comes out higher, which tells you the cheaper-looking rate is the costlier loan on a full-cost basis.

Work through each Loan Estimate in this order:

  1. Page 1: interest rate, monthly principal and interest, and whether the rate can change.
  2. Section A: origination charges, including points and underwriting or processing fees.
  3. Sections B and C: services you cannot shop for versus services you can shop for, such as title.
  4. Page 3: the APR and the Total Interest Percentage (TIP).

The common mistake is comparing only the page 1 rate. A related misconception is that APR captures everything. It does not account for how long you will keep the loan, and it can treat some costs unevenly, so use it as a cross-check rather than a verdict.

What to measure: the gap between APR and note rate for each quote, and the total of Section A charges per quote. A large APR-to-rate gap points to heavy upfront costs, which sets up the breakeven math in the next strategy.

5. Run the Points-vs-Credits Breakeven

Paying points buys a lower rate in exchange for cash at closing. A lender credit does the reverse, lowering your upfront cost in exchange for a higher rate. Neither is good or bad on its own. What matters is whether you keep the loan long enough for the savings to repay the cost, and breakeven turns that into a number.

Worked illustration: a $400,000, 30-year fixed loan.

  • Option A: 6.25% with $3,500 in upfront costs. Principal and interest is about $2,462.87 a month.
  • Option B: 6.00% with $7,500 in upfront costs. Principal and interest is about $2,398.20 a month.

Option B saves about $64.67 a month ($2,462.87 minus $2,398.20) but costs $4,000 more upfront ($7,500 minus $3,500). Divide $4,000 by $64.67 and breakeven lands near month 62, a little over five years. If you will hold the loan longer than that, Option B wins. If you expect to sell or refinance sooner, Option A does.

The steps are short: subtract the lower upfront cost from the higher, subtract the lower payment from the higher, divide the first result by the second, and compare the answer to how long you realistically expect to keep the loan.

The common mistake is paying points on a loan you will refinance or sell before breakeven, which quietly donates money to the other side of the table. Be honest about your holding period, especially if you plan to refinance when rates fall.

What to measure: breakeven months versus your expected holding period. If breakeven is longer than your realistic timeline, take the lower-cost option.

6. Compare Total Cost of Ownership

The monthly payment that matters is not principal and interest. It is the full housing payment, and it differs between quotes because mortgage insurance, taxes, and insurance estimates differ. Two quotes with the same rate can carry different true costs if one assumes a lower tax figure.

Here is an illustration using Wake County, NC. Suppose a $400,000 home with 10% down, so a $360,000 loan. Quote A is 6.25% with borrower-paid PMI. Quote B is 6.50% with no PMI, such as a structure where the cost is built into the rate. For property tax, I am using an assumed combined rate of 0.80% of assessed value purely for illustration. Pull the current rate from the official Wake County tax administration page, because rates change each fiscal year and city rates may stack on top. Insurance is assumed at $1,800 a year, and PMI at 0.50% of the loan a year.

  • Quote A: principal and interest $2,216.58, PMI $150.00, property tax $266.67, insurance $150.00. Total: $2,783.25 a month, or $166,995.00 over 60 months.
  • Quote B: principal and interest $2,275.44, no PMI, property tax $266.67, insurance $150.00. Total: $2,692.11 a month, or $161,526.60 over 60 months.

The higher-rate, no-PMI loan costs about $91.14 less a month and $5,468.40 less over five years in this illustration. PMI also matters for how long it lasts. Under the standard rules, you can request removal at 80% of the original value ($320,000 here) and it terminates automatically at 78% ($312,000). After 60 payments on Quote A, the balance is roughly $336,000, still about 84% of the original value, so PMI would run past year five. For FHA loans, check HUD’s mortgage insurance rules, since MIP works differently.

Build a worksheet for each quote with principal and interest, tax, homeowners insurance, PMI or MIP, HOA dues, and cash to close. The common mistake is using one generic tax estimate for every quote or ignoring mortgage insurance.

What to measure: total monthly housing payment and total 5-year cost for each quote, with cash to close added to year one.

7. Benchmark Against Market Data and Compare Lock Terms

A quote means little without context. Freddie Mac publishes its Primary Mortgage Market Survey (PMMS) weekly, including the average 30-year fixed rate and average points. Note the figure and its “as of” date at the time you compare, then compute each quote’s spread against it. Compare like for like: a 30-year conventional quote against the 30-year average, not an FHA or jumbo quote.

Lock terms can outweigh a rate edge. Imagine one quote sits 0.30% under the PMMS average but carries a 15-day lock. Another sits 0.10% under with a 45-day lock that matches your closing date. If your closing is 40 days out, the first rate can expire before you close, and an extension fee or a re-price at higher rates can wipe out the advantage.

For each quote, record:

  1. Lock length in days, and whether it covers your closing date with a few days of cushion
  2. Extension cost per day or per week
  3. Float-down availability: whether you can capture a lower rate if the market improves
  4. Whether the quote is actually locked or only an estimate

The common mistake is treating an unlocked, estimated quote as a firm one, or ignoring that the lock expires before closing. A rate that is not locked is a forecast, not a promise.

What to measure: each quote’s spread versus PMMS on the same loan type, and lock days versus days to closing. A short lock with a wide spread deserves skepticism.

Mortgage Rate Comparison Questions, Answered Directly

What is the way to compare mortgage rates from multiple lenders?

Send an identical quote request sheet to every provider, then compare their Loan Estimates side by side, looking at APR, fees, points, lock terms, and total cost rather than the advertised rate alone. Gather early pricing through a soft credit pull so your credit is not affected until you formally apply.

Does shopping for a mortgage hurt your credit score?

Not necessarily. Scoring models generally group multiple mortgage inquiries in a short window into one, and soft-pull pricing does not register as a hard inquiry at all. The CFPB describes the window as commonly 14 to 45 days depending on the scoring model, so confirm it and apply within the shortest one.

What is a soft credit pull mortgage review?

It is a credit check that does not affect your score, used to produce real pricing before you apply. Duane Buziak’s NoTouch Credit Pull supports a mortgage pre-approval without hard pull, so you can compare options with no credit hit on a mortgage application at the pricing stage.

How many quotes should I get?

Get at least three, ideally from at least two channels: a direct single-company provider and a broker with wholesale access. More quotes help only if every one is built from the same request sheet.

Is the lowest rate always the cheapest loan?

No. A lower rate can come with higher origination charges, points, or a short lock. Compare APR, Section A charges, and total 5-year cost to see which quote actually costs less.

What is a Loan Estimate and when do I get it?

A Loan Estimate is a standardized three-page disclosure of your rate, payment, and closing costs. Providers must deliver it within three business days of receiving your application, according to the CFPB.

How do I know if paying points is worth it?

Divide the extra upfront cost by the monthly payment savings to find breakeven in months. In the $400,000 example above, $4,000 of extra cost against $64.67 in monthly savings breaks even near month 62, so points pay off only if you keep the loan longer than that.

How does a mortgage broker help me compare rates?

A broker can price your scenario across hundreds of wholesale lenders instead of one menu. Duane Buziak, NMLS #1110647, lays those options next to direct-provider quotes so you can compare the full cost of each.

Sequence Your Comparison, Then Dare to Compare

Start with the quote request sheet and soft-pull pricing. Those two steps make every later number trustworthy and keep your credit untouched while you narrow the field. Next, compare Loan Estimates and run the points breakeven on your finalists, since those reveal which low rate is really a high-cost loan. Finish with total cost of ownership and lock terms, which decide the close calls. If your timeline is short, give lock length extra weight, because a great rate that expires before closing is not a great rate.

When you are ready to Dare to Compare, compare your options with me directly. Call Duane Buziak at 804-212-8663 or start at ShopMortgageRates.com, where the rule is Don’t Guess Your Rate, Shop It. Your dream home is within reach. Discover how much you could save with personalized mortgage rates tailored to your unique situation. Securely pre-qualify in minutes with no impact to your credit score and compare competitive offers from trusted lenders who are ready to help you save.