Duane Buziak’s 7 Ways to Avoid PMI on a Mortgage in 2026: No-PMI Mortgage Options Compared

How to Refinance Your Home in Virginia: A Step-by-Step Guide to Lower Rates and Bigger Savings
Duane Buziak

Duane Buziak
Mortgage Maestro | NMLS #1110647 | Coast2Coast Mortgage LLC
Licensed mortgage broker serving Virginia, Florida, Tennessee, Georgia, Washington DC, North Carolina, South Carolina, and Maryland, specializing in VA home loans and first-time homebuyer programs.

Private mortgage insurance is one of the larger avoidable costs in a low-down-payment purchase, and the routes around it are scattered across loan types that rarely get priced against each other. A VA loan swaps monthly insurance for a funding fee. A physician loan trades it for a different rate. Lender-paid coverage hides it inside the interest rate. Each one removes a line item, and each one adds a cost somewhere else. If you are looking for no PMI mortgage options in 2026, the useful question is not whether PMI disappears but which route costs least over the years you will actually own the home. Duane Buziak walks through seven ways to avoid or eliminate PMI, with worked dollar examples, so you can run each against your own numbers. Don’t guess your rate: shop it.

By Duane Buziak, NMLS #1110647

A few terms first. PMI is private mortgage insurance, required on most conventional loans when the loan-to-value ratio (LTV, the loan balance divided by the home’s value) is above 80%. LPMI is lender-paid mortgage insurance, where the premium is built into a higher interest rate. The VA funding fee is a one-time charge on VA loans in place of monthly insurance. A piggyback loan is a second mortgage that fills the gap between your down payment and 20%. Every example below is an illustration with round numbers, not a quote. Rates, fees, and program limits change, so everything here reads “as of 2026.”

1. 20% Down on a Conventional Loan

The cleanest way to avoid PMI is to never trigger it. Conventional lenders require mortgage insurance when the loan exceeds 80% of the home’s value, so a 20% down payment puts you at 80% LTV on day one and the charge never starts. The mechanism is simple: the insurance protects the investor against default risk on thinly secured loans, and at 80% LTV the investor considers the equity cushion sufficient.

Suppose you buy a $400,000 home with $80,000 down. Your loan is $320,000 and no PMI applies. That figure becomes your baseline for every other strategy in this article, which is why the full cost build-up appears in the TCO worksheet after the list. The question is not whether 20% down is cheaper per month (it nearly always is) but whether getting there is the right use of your cash.

To put this into practice:

  1. Calculate required cash: down payment plus closing costs plus prepaid items.
  2. Subtract that from your liquid savings and see what reserves remain.
  3. Price a 10% down scenario with PMI for the same home.
  4. Compare total cost over the years you expect to stay, not just the monthly payment.

The common mistake is draining every dollar to hit 20% and arriving at closing with no emergency fund. A new roof or a job gap on a house you cannot afford to carry costs far more than a few years of PMI. Many buyers are better served keeping several months of reserves and accepting a temporary insurance charge that they can later cancel (see strategy 7).

Measure two things: the total monthly payment and the 7-year cost of ownership versus a lower-down-payment alternative. If the PMI you would pay on the alternative is small relative to the reserves you would keep, the lower down payment can win even though PMI exists.

2. VA Loan

Eligible veterans, service members, and some surviving spouses can buy with no down payment and no monthly mortgage insurance. In exchange, the VA charges a one-time funding fee that can be financed into the loan. The mechanism is a government guarantee: the VA backs a portion of the loan, which reduces the investor’s risk without a recurring premium. Some borrowers, such as those receiving VA disability compensation, are exempt from the fee. Confirm your tier on the VA funding fee and closing costs page, since the fee varies by down payment, prior use, and service type.

Take a $400,000 purchase with zero down. The funding fee is added to the loan balance, so you borrow slightly more than $400,000 and pay interest on the fee. Compare that with a conventional loan at 5% down, where PMI is charged monthly until you reach 80% LTV. The VA route usually wins on monthly payment, but you have to weigh the financed fee against the PMI you would have paid.

Here is the sequence:

  1. Obtain your Certificate of Eligibility (COE). Duane Buziak can pull it electronically with your Social Security number and date of birth.
  2. Confirm your funding fee tier at VA.gov.
  3. Request a soft credit pull quote, so you see real pricing without a hard inquiry.
  4. Compare the VA quote line by line against a conventional quote with PMI.

Entitlement matters too. If you have used entitlement before, you may still have second-tier (bonus) entitlement. The mechanics: take the county loan limit, multiply by 25% for the maximum guarantee, subtract the entitlement already used, then multiply what remains by four to find the no-down-payment purchase limit. A broker who works through this with you can tell you quickly whether zero down is still available on a second VA purchase.

The common mistake is ignoring the funding fee when comparing against PMI, then concluding VA is free of insurance cost. It is not free; the cost is simply shaped differently. Measure the funding fee plus interest on it against total PMI plus interest over your expected holding period.

3. Physician/Doctor Loan

Physician loans are a specialty program for medical professionals, and under many investor guidelines they allow high LTV, sometimes 95% or more, without monthly PMI. The reasoning on the investor side is that doctors, including residents and fellows with signed contracts, have predictable income growth even when current student debt and savings look thin on paper. These programs often use more flexible debt-to-income treatment of student loans.

Imagine a resident with a signed employment contract, heavy student debt, and little saved, buying with 5% down. A conventional loan at that down payment would carry PMI. A physician loan could waive monthly PMI but may price the rate higher than the conventional alternative. Whether it wins depends on the spread between the two.

To compare properly:

  1. Gather your employment contract, recent pay documentation, and student loan statements.
  2. Request quotes from multiple wholesale investors, since guidelines and pricing differ between programs.
  3. Get a conventional quote at the same down payment for comparison.
  4. Run both through the same 7-year cost model.

The common mistake is choosing on PMI savings alone. A quarter-point higher rate on a large balance can cost more per month than the PMI you avoided, and unlike PMI the rate does not cancel when you build equity. You would need a refinance to shed it.

What to measure: the rate difference converted to a monthly dollar amount versus the PMI payment, and the 7-year cost of each path. If you expect to refinance within a few years as your income rises, that shortens the window in which a higher rate hurts.

4. Lender-Paid Mortgage Insurance (LPMI)

With LPMI, there is no separate monthly insurance line. The lender pays the mortgage insurer, and you repay that cost through a higher interest rate for the life of the loan. The monthly payment can look appealing because the rate increase is often smaller in dollars than the borrower-paid premium, and interest may be tax-deductible while PMI treatment has varied over the years, so ask a tax professional.

Here is a labelled illustration. Suppose a $360,000 loan where borrower-paid PMI would add about $150 a month, while the LPMI version raises the rate enough to add about $110 a month. The LPMI payment is $40 lower each month. But the PMI could be cancelled around the time you reach 80% LTV, while the higher rate stays. If PMI would last roughly 8 years, the break-even depends on how the cumulative extra interest compares with the PMI you would have paid before it ended. Your actual figures will differ; the method is what matters.

How to run it:

  1. Ask a broker for both quotes side by side: borrower-paid PMI and LPMI, same loan amount and same program.
  2. Calculate the monthly difference in each scenario.
  3. Estimate the month when PMI would have cancelled on the borrower-paid loan.
  4. Find the break-even month and compare it with how long you plan to own the home.

The common mistake is picking LPMI and then keeping the loan well beyond the break-even point. The embedded cost cannot be cancelled without refinancing, so a long hold turns a lower payment into a higher lifetime cost. LPMI tends to suit people who expect to sell or refinance in a few years.

Measure the break-even month and the total interest plus insurance paid under each option, through your expected exit date.

5. Piggyback (80/10/10) Loan

A piggyback loan structure uses a second lien to fill the gap, so the first mortgage stays at 80% LTV and avoids PMI. In an 80/10/10, you take an 80% first mortgage, a 10% second mortgage, and put 10% down. The mechanism works because PMI is triggered by the first mortgage’s LTV, not your total debt.

Labelled illustration: a $400,000 home with $40,000 down, a $320,000 first mortgage, and a $40,000 second. Compare that with a single $360,000 loan at 10% down with PMI. The piggyback avoids PMI but adds a second payment, usually at a higher rate than the first. Whether the combined payment beats the single loan plus PMI depends on the second-lien rate and the PMI quote you would otherwise receive.

Steps to evaluate it:

  1. Confirm that an investor offers a combined structure for your credit profile and property type, since availability varies.
  2. Get the second-lien terms: rate, rate type, repayment period, and any draw period.
  3. Add the first and second payments to get the combined monthly cost.
  4. Compare against the single-loan-with-PMI payment.

The pitfall is payment shock. Many second liens are HELOCs with variable rates, so a payment that looks lower today can climb if rates rise. A fixed-rate second lien removes that risk but often prices higher. Underestimating this is the most common way piggyback loans backfire.

Measure the combined monthly payment now, and test it at a rate one or two points higher on the second lien. If the structure only works in the best case, it is fragile.

6. Down Payment Assistance Paired with a Cost Comparison

Down payment assistance (DPA) does not remove PMI. It preserves your cash so you can buy sooner or keep reserves, and the PMI decision then gets made with a clear view of the numbers. Duane Buziak works with Dynamo DPA and Turbo DPA, which are programs designed for eligible buyers who have income to qualify but limited savings for the upfront costs.

Labelled illustration: a buyer with limited savings uses DPA toward closing costs and down payment. Their monthly payment on the conventional loan includes PMI because LTV is above 80%. The comparison is against a path with no DPA, where the buyer either waits to save more or empties their account to reduce PMI. DPA terms differ, and some programs come with a slightly higher rate or a repayment feature, so the savings in cash have to be weighed against those terms.

The process:

  1. Start with a soft pull pre-approval, which means no hard inquiry on your credit report.
  2. Confirm DPA eligibility and current availability, since funding and rules change.
  3. Get a quote with DPA and one without.
  4. Compare cash to close, monthly payment, and any DPA repayment terms against what the PMI costs.

Two mistakes come up often. The first is assuming DPA eliminates PMI; it does not. The second is trying to stack multiple grants, which program rules do not allow, so plan around a single assistance source. Learn what the program requires before you build a budget on it.

Measure cash to close and monthly payment with and without DPA, and note the month PMI could end in each case. The point of the comparison is to see what you are really paying for the cash you keep.

7. Cancel PMI Early

If you already have a conventional loan with PMI, the cheapest way to stop paying is to remove it as soon as you are entitled to. Under the Homeowners Protection Act, you can request cancellation when your balance reaches 80% of the home’s original value, and your servicer must terminate it automatically at 78%. The CFPB explains PMI cancellation rights in plain terms. Requesting at 80% rather than waiting for 78% saves months of premiums.

Here is the math. Take a $360,000 loan on a $400,000 home, which is 90% LTV at the start. You reach 80% LTV when the balance falls to $320,000, so you need to pay down $40,000 of principal. On a 30-year loan at a typical rate that takes several years of scheduled payments. Now suppose the home appreciates to $450,000. At a $340,000 balance you are at about 75.6% LTV, so a lender-approved reappraisal could support removal years sooner. Each month of PMI avoided is real money; at a hypothetical $150 a month, three extra months is $450.

To do it:

  1. Read your servicer’s cancellation rules, which vary on seasoning periods and appraisal requirements.
  2. Send a written request once you hit 80% of the original value.
  3. If values have risen, ask about a new appraisal and its cost.
  4. Confirm a good payment history and no subordinate liens, which servicers typically require.

Two misconceptions cost people money. Waiting for automatic termination at 78% means paying extra months for nothing. And assuming FHA mortgage insurance cancels the same way is wrong: for many FHA loans originated with low down payments, the premium stays for the life of the loan unless you refinance, and the rules depend on your down payment and origination date.

Measure the month PMI ends, the total PMI paid, and the appraisal cost against the premiums you would save. If an appraisal costs a few hundred dollars and saves a year of premiums, it pays for itself quickly.

TCO Worksheet: What Each Month and Each Year Really Costs

Monthly payment alone hides the comparison. A total cost of ownership worksheet adds principal, interest, property tax, homeowners insurance, and mortgage insurance, then multiplies out over a holding period. The property tax line is local, so it must come from the official source for the home’s county. For this illustration, the locality is Chesterfield County, Virginia; look up the current rate on the Chesterfield County government website (Treasurer and Real Estate Assessor pages) and confirm the as-of date before you rely on any figure. Rates are set annually and differ by county and state, so substitute your own county’s assessor page when you run your numbers.

Here is a worked baseline, using stated assumptions rather than a quote. Suppose a $400,000 home, $80,000 down, and a $320,000 loan at 6.50% on a 30-year fixed term. Principal and interest: the monthly rate is 0.065 ÷ 12 = 0.0054167. The payment factor for 360 months works out to about 0.006321, so $320,000 × 0.006321 ≈ $2,022.62 per month. Over 84 months (7 years), that is $2,022.62 × 84 ≈ $169,900.

Now add the other pieces using placeholders you must replace with sourced figures:

  • Property tax: $400,000 × the current county rate from the assessor page, divided by 12. Record the rate and the date you pulled it.
  • Homeowners insurance: get a real quote; do not estimate from a national average.
  • PMI: zero in this 20% down baseline. In the 10% down comparison, a $360,000 loan carries a PMI quote from a mortgage insurer, typically a fraction of a percent of the loan per year.

To compare, repeat the same arithmetic for each strategy: VA (financed funding fee, no monthly insurance), physician loan (higher rate, no PMI), LPMI (higher rate, no PMI line), piggyback (two payments), and conventional with PMI. Then multiply each monthly total by 84 and add upfront costs. The route with the lowest 7-year total is your answer, which is often not the one with the lowest monthly payment. For background on the underlying cost components, see the CFPB’s Owning a Home resources, and for conforming loan limits check the FHFA conforming loan limit page.

Side-by-Side Comparison of the Main Routes

The table summarizes how each route handles mortgage insurance. Figures marked as depending on quotes will vary by borrower and market; the 7-year column describes what drives the result, not a promised number. Details such as the VA funding fee and FHA mortgage insurance premiums change, so confirm current terms at VA.gov and HUD.gov as of 2026.

  • Conventional, 20% down: 20% down payment; no monthly insurance; no insurance-related upfront fee; no rate penalty; nothing to cancel; 7-year cost driven by principal, interest, tax, and homeowners insurance only.
  • VA loan: as little as 0% down; no monthly mortgage insurance; upfront funding fee (financeable, tier-dependent, some borrowers exempt); rate impact typically competitive; nothing to cancel; 7-year cost includes interest on the financed fee.
  • Physician loan: often 0% to 5% down; no monthly PMI under investor guidelines; limited upfront insurance fees; rate may run higher than conventional; the higher rate does not cancel without a refinance; 7-year cost turns on rate spread versus PMI.
  • Lender-paid mortgage insurance (LPMI): 5% to 15% down; no separate monthly premium; no upfront insurance fee in most cases; higher interest rate; cannot be cancelled without refinancing; 7-year cost turns on break-even month.
  • Piggyback (80/10/10): about 10% down; no PMI on the first lien; second-lien closing costs; second lien usually priced above the first; second lien can be paid off or refinanced; 7-year cost turns on second-lien rate and type.
  • Conventional with PMI: 3% to 19.99% down; monthly PMI; typically no upfront premium if borrower-paid monthly; rate often slightly better than LPMI; cancellable at 80% by request, automatic at 78%; 7-year cost equals premiums until cancellation plus the loan costs.
  • FHA: 3.5% down at the minimum; monthly mortgage insurance premium; upfront mortgage insurance premium (financeable); rate often competitive; frequently not cancellable at low down payments unless you refinance; 7-year cost includes both premiums.

Large online lenders such as Rocket and Movement advertise their own programs, and Veteransunited focuses on VA lending. Their products and pricing differ from a broker’s wholesale menu, so compare actual written quotes rather than advertised headlines.

Where to Start, and How the Routes Combine

Run the 20% down baseline first. It shows you the payment with no insurance at all, and every other route gets measured against it. If you qualify for a VA loan or a physician program, price those next, since both can eliminate monthly PMI at a low down payment. If neither applies, compare LPMI against borrower-paid PMI by break-even month, then check whether a piggyback or down payment assistance changes the picture. Whatever you choose, plan to cancel PMI at 80% if it applies to you. Skip any option you cannot price against a real 7-year total.

Don’t guess your rate: shop it. Duane Buziak lays these options side by side from hundreds of wholesale lenders, so you can see every route on one page before committing to one. Your dream home is within reach, and you can discover how much you could save with personalized mortgage rates tailored to your unique situation. Securely pre-qualify in minutes with no impact to your credit score and compare competitive offers from trusted lenders who are ready to help you save. Request your soft pull quote from Duane Buziak at Shop Mortgage Rates by Duane Buziak.