Investment property financing options differ sharply in down payment, rate, documentation, and total cost, and the lowest monthly payment is rarely the lowest-cost deal over five years. I compare hundreds of wholesale lenders as an independent broker, so I see how the same property prices out under very different structures. Below are seven routes, from conventional investor loans to DSCR, equity-based funding, and bridge loans. Every dollar figure is an illustration with stated assumptions, not a quote. Rate programs and guidelines change, so verify current terms before you commit. The principle behind the site is simple: Don’t Guess Your Rate. Shop It.
1. Conventional Investor Loan
A conventional investor loan is GSE-conforming financing for a non-owner-occupied property. It requires full documentation and usually carries the lowest rate tier among investor products. The cost of that low rate is paperwork and cash: as of 2026, the Fannie Mae Selling Guide generally caps a one-unit investment purchase at 85% LTV (loan-to-value) and a two-to-four-unit purchase at 75% LTV. Verify the current matrix before you plan around it.
Here is an illustration. Suppose you buy a $300,000 single-family rental in North Carolina with 25% down ($75,000), leaving a $225,000 loan at 75% LTV, so no PMI. For arithmetic only, assume a 7.00% rate on a 30-year term, which puts principal and interest at about $1,497. Assume a 0.85% effective property tax rate ($2,550 a year, $213 a month) and $1,500 a year for landlord insurance ($125 a month). Check your actual rate on the North Carolina Department of Revenue property tax page and your county tax office. Full PITIA (principal, interest, taxes, insurance, and association dues) comes to roughly $1,835 a month.
- Gather two years of tax returns, recent pay stubs, and bank statements.
- Confirm reserves, since investor files often need several months of PITIA set aside per financed property.
- Run a soft credit pull mortgage review so quotes from multiple wholesale lenders can be compared without a hard inquiry.
- Lock once the five-year cost comparison is clear.
The common mistake is assuming primary-residence down payment and pricing apply to a rental. They do not, and investor pricing adjustments add real cost. Measure five-year total cost (interest plus fees) and monthly cash flow after full PITIA, not the headline rate.
2. DSCR Loan
DSCR stands for debt service coverage ratio. A DSCR loan qualifies the property by its own income, comparing monthly rent to PITIA instead of leaning on your personal income. That does not mean no documentation. Expect a lease or appraiser rent schedule, asset verification, reserves, and a credit review.
Illustration: a rental brings in $2,400 a month against $2,000 PITIA. The ratio is 2,400 ÷ 2,000 = 1.2, meaning rent covers the payment with 20% to spare. Many DSCR programs want at least 1.0 to 1.25, though guidelines vary by program. Now compare against conventional. Suppose the DSCR quote runs 1.0 percentage point higher in rate. On a $225,000 loan that adds roughly $150 a month in interest cost, or $9,000 over five years, before any prepayment penalty. The trade is that DSCR can work when your tax returns show heavy write-offs, or when you already hold several financed properties.
- Get a rent estimate or signed lease.
- Compute DSCR from rent divided by PITIA.
- Request quotes with and without a prepayment penalty.
- Line the best DSCR quote up against a conventional quote on the same property.
The mistake to avoid is ignoring prepayment penalties and higher pricing when you plan a short hold. A step-down penalty on a flip-and-sell can erase the convenience. Measure the DSCR ratio, the rate spread over conventional, and break-even months, meaning the point where any upfront savings are overtaken by the higher monthly cost.
3. HELOC or Cash-Out Refinance on a Primary Home
Equity in the home you live in can fund an investment down payment, and primary-residence pricing is usually better than investor pricing. A HELOC is a variable-rate line of credit behind your first mortgage. A cash-out refinance replaces the first mortgage with a larger one. For a conventional primary-residence cash-out, the maximum is 90% LTV as of 2026, per the Fannie Mae Selling Guide. The CFPB publishes plain-language guidance on how these products differ.
Illustration: a $60,000 draw
Suppose your home is worth $500,000 with a $250,000 first mortgage at 3.5%. Drawing $60,000 puts combined LTV at 310,000 ÷ 500,000 = 62%. If the HELOC runs 8.5% (assumed), the blended rate across both loans is (250,000 × 3.5% + 60,000 × 8.5%) ÷ 310,000 = 4.47%, about $13,850 in first-year interest. A cash-out refinance to $310,000 at an assumed 7.00% costs about $21,700 in first-year interest, plus closing costs on the whole balance. Keeping the cheap first lien often favors the HELOC, but the variable rate can reset higher.
- Order a value estimate on your home.
- Calculate combined LTV against the 90% conventional cash-out ceiling.
- Compare the variable HELOC to a fixed cash-out refinance, including closing costs and rate caps.
The pitfall is forgetting that your own home is collateral for the rental’s down payment. Measure the blended rate and test your cash flow if the rental sits vacant for three months.
4. Investment Property Cash-Out Refinance
This route pulls equity out of a rental you already own to fund the next purchase. Because the collateral is an investment property, the limits are tighter than on a primary home. As of 2026, Fannie Mae guidelines generally allow a lower maximum LTV on investment-property cash-out than on a primary residence, and they also look at how long you have held the property (seasoning, often six months for cash-out).
Illustration: a rental is worth $300,000 with a $150,000 balance. At a 75% LTV ceiling, the maximum new loan is $225,000. You take a $200,000 loan (66.7% LTV) to release $50,000. Suppose closing costs are $5,000 and the refinance trims $60 a month from the payment on the existing balance. Break-even is 5,000 ÷ 60, about 83 months, which is longer than a five-year hold. The $50,000 itself must then earn more than it costs. At the assumed 7.00%, borrowing it adds about $333 a month.
- Confirm seasoning and the LTV cap for the unit count.
- Document rents with leases and a rent schedule.
- Compare rate and fees across quotes.
- Divide closing costs by monthly savings to find break-even months.
The classic mistake is refinancing without checking break-even against your expected hold time. Measure break-even months and the post-refinance DSCR, since a bigger loan can push a thin-margin rental below 1.0.
5. House Hacking a 2-4 Unit Property
House hacking means living in one unit of a two-to-four-unit property and renting the others. You use owner-occupant financing, which is priced and underwritten more favorably than investor loans. The catch is the occupancy requirement. Misconception to clear up: house hacking does not let you skip it. FHA generally requires you to move in within 60 days and live there at least a year. Check current rules at HUD.gov, and check Fannie Mae’s owner-occupied multi-unit limits (as of 2026, typically higher down payments for three and four units than for two) in the Selling Guide.
Illustration: you buy a duplex with a $3,000 monthly PITIA. The second unit rents for $1,600. Your actual net housing cost is $1,400. For qualifying, lenders usually credit only a portion of projected rent (often 75%, which would be $1,200 here), so you qualify on a smaller offset than you actually receive.
- Verify occupancy rules and current minimum down payments at HUD.gov and in the Fannie Mae Selling Guide.
- Document projected rents with a lease or appraiser schedule.
- Review down payment assistance eligibility case by case, including the Dynamo and Turbo DPA programs, which I will check against your specific scenario.
The two mistakes are misrepresenting occupancy intent, which is mortgage fraud, and stacking assistance programs the guidelines do not allow. Measure net monthly housing cost after rental income, and compare it with what renting a similar home would cost you.
6. Physician/Doctor Loan
Duane Buziak offers a physician loan program for medical professionals. It does not finance rentals directly. Its value for an investor is indirect: it can lower the cash needed for your own home, preserving savings and borrowing capacity for a later rental purchase. Terms on down payment, PMI treatment, and eligibility change, so confirm current details with me before planning around them.
Illustration: a resident buys a $350,000 primary home. A conventional 20% down payment would be $70,000. Suppose the physician program allows 5% down ($17,500) with no monthly PMI (an assumption, to be confirmed). That preserves $52,500 at closing, which could cover a 25% down payment on a lower-priced rental. The tradeoff is that the physician loan’s rate or fees may run above a conventional loan’s. Over five years that cost has to be weighed against what the preserved cash earns.
- Confirm eligibility (degree, employment status, contract start date) and current terms with Duane Buziak.
- Get a conventional quote on the same home, including PMI.
- Compare cash to close, monthly payment, and five-year cost side by side.
The common mistake is assuming the program finances the rental. It applies to the primary residence. Measure cash preserved at closing and total five-year cost against the conventional alternative. If the cash saved can fund a rental that cash-flows, the program pays for itself. If it just leaves you with a higher payment, it does not.
7. Non-QM and Bridge Financing
Non-QM (non-qualified mortgage) loans use flexible documentation, such as 12 to 24 months of bank statements, instead of tax returns. They suit self-employed investors whose deductions shrink taxable income. Bridge loans are short-term, usually interest-only, and fill timing gaps or fund renovation deals before long-term financing.
Illustration: a self-employed investor buys a $200,000 fixer with a $160,000 bridge loan at an assumed 10% interest-only, 2 points, and an eight-month renovation and lease-up. Carrying cost is about $1,333 a month × 8 = $10,667, plus $3,200 in points, roughly $13,900 total. After stabilization, the investor refinances into a bank statement or DSCR loan. If the project runs four months late, another $5,300 of interest accrues. That is why the exit plan matters more than the entry rate.
- Gather 12 to 24 months of personal or business bank statements.
- Set an exit plan with a date and a backup, such as a longer extension option.
- Compare total cost to a conventional route, and confirm what the CFPB and your state say about disclosures for your loan type at consumerfinance.gov.
The big mistake is staying in higher-cost short-term financing with no refinance plan. Measure total carrying cost until refinance and the rate gap to conventional.
Side-by-side: how the seven routes compare on cost drivers
These are directional comparisons, not quotes. Rates, APRs, and fees depend on credit, LTV, and market conditions, so check the current benchmark at Freddie Mac’s PMMS and then price your own file.
- Conventional investor: lowest investor rate tier, typically 15% to 25% down, 30-year or 15-year fixed terms, full documentation, standard closing costs plus investor pricing adjustments.
- DSCR: rate usually above conventional, commonly 20% to 25% down, rent-based qualification, prepayment penalties common, origination fees vary.
- HELOC or primary cash-out: pricing tied to your primary home; HELOC is variable and interest-only during the draw period; cash-out refinance is fixed, up to 90% LTV conventional.
- Investment cash-out refinance: investor pricing, lower LTV cap than primary, seasoning rules, full closing costs on the new loan.
- House hack (FHA or conventional): owner-occupant pricing, low to moderate down payment, mortgage insurance likely, occupancy required.
- Physician loan: primary residence only, low down payment, PMI treatment varies by program, terms confirmed with Duane Buziak.
- Non-QM and bridge: highest rates and fees of the group, flexible documentation, short terms for bridge loans, and a required exit.
Investment property financing questions, answered directly
What is the lowest-cost way to finance an investment property?
A conventional investor loan usually carries the lowest rate among investor products. Total cost also depends on fees, down payment, and hold time, so compare five-year cost across quotes.
How much down payment does an investment property need?
As of 2026, Fannie Mae generally requires at least 15% down on a one-unit investment purchase and 25% on two to four units. Confirm in the Selling Guide.
Are investment property rates higher than primary-home rates?
Yes. Investor loans carry pricing adjustments because non-owner-occupied properties have historically defaulted more often. The gap varies by LTV and credit score.
What is a DSCR loan?
A DSCR loan qualifies you on the property’s rent compared with its PITIA. A 1.2 ratio means rent is 120% of the payment.
Does a DSCR loan require no documentation?
No. It skips personal income verification, but you still document assets, reserves, credit, and the property’s rent through a lease or rent schedule.
Can I use a HELOC for an investment property down payment?
Yes, many lenders allow it, but your primary home secures the debt and the variable rate can rise. Check combined LTV and reserve requirements.
What is the maximum cash-out refinance LTV?
A conventional primary-residence cash-out is capped at 90% LTV as of 2026. Investment properties have lower caps, and VA cash-out on a primary home can reach 100% LTV.
Can I house hack and skip the occupancy requirement?
No. Owner-occupant financing requires you to live in the property, and FHA generally requires occupancy for at least a year. Misstating intent is mortgage fraud.
Does a physician loan finance rental properties?
No. The program is for a primary residence, though it can preserve cash and borrowing capacity for a later rental purchase. Confirm current terms with Duane Buziak.
Will comparing mortgage quotes hurt my credit?
Not with a soft pull mortgage broker. A soft credit pull review lets you compare options without a hard inquiry, and a hard pull is only needed once you choose to proceed.
The order to try them in: compare conventional and DSCR first
Start with conventional and DSCR quotes on the same property. Together they set your price ceiling and show what you gain or give up by trading documentation for rate. Then price equity-based funding (HELOC, primary cash-out, or a rental cash-out refinance) to see whether it lowers your required cash. Add house hacking or the physician loan if your situation fits, and keep non-QM and bridge financing for deals where documentation or timing rules out the others. Whichever route wins, pick it on total cost over your hold period, not the rate alone.
Your dream home is within reach. Discover how much you could save with personalized mortgage rates tailored to your unique situation. Securely pre-qualify in minutes with no hard inquiry mortgage pre approval and no credit hit, then compare competitive offers from trusted lenders who are ready to help you save. Shop Mortgage Rates by Duane Buziak lays every option side by side so you can compare your options before you commit.

