If you can’t afford 20 percent down, you are in good company. National Association of Realtors buyer surveys have consistently put the typical first-time buyer’s down payment well under 20 percent. The 20 percent rule is a myth, not a requirement. It marks the point where conventional private mortgage insurance (PMI) is no longer required, and nothing more.
The cheapest route is not always the one with the smallest down payment, so this article compares seven real routes by what they cost per month and over five years. The dollar figures are labelled illustrations, built on assumed rates and fees as of 2026. For live pricing, check the current Freddie Mac Primary Mortgage Market Survey, because your quote will differ. Don’t guess your rate. Shop it.
By Duane Buziak, NMLS #1110647
1. Conventional loans with 3% to 5% down
Fannie Mae’s HomeReady and Freddie Mac’s Home Possible allow as little as 3% down for eligible buyers, generally with household income at or below 80% of area median income (confirm current terms on both sites). Standard conventional programs start at 5% down in many cases. Because loan-to-value (LTV) is above 80%, you pay PMI, but conventional PMI is priced on your credit score and LTV, and it can be cancelled.
Illustration, not a quote: a $400,000 home, 30-year fixed at an assumed 6.25%, property tax at 0.87% of price ($290 a month), insurance at $150 a month, and PMI assumed at 0.80% (3% down) and 0.55% (5% down) for a 740 score.
- 3% down ($12,000): P&I $2,389 + PMI $259 + tax $290 + insurance $150 = about $3,088 a month.
- 5% down ($20,000): P&I $2,340 + PMI $174 + tax $290 + insurance $150 = about $2,954 a month.
- 20% down ($80,000): P&I $1,970 + no PMI + tax $290 + insurance $150 = about $2,410 a month.
Over five years, PMI alone adds roughly $15,500 at 3% down and $10,400 at 5% down. That is the price of keeping $60,000 to $68,000 in your pocket.
- Start with a soft credit pull mortgage pre-approval so shopping doesn’t dent your score.
- Confirm income-limit eligibility on the Fannie Mae and Freddie Mac pages.
- Collect PMI quotes from several lenders through one broker.
- Choose monthly PMI or single-premium PMI based on how long you expect to keep the loan.
The common mistake is picking the lowest down payment without comparing PMI, which swings widely with credit score. A 680 and a 760 can see very different PMI on the same loan.
What to measure: total monthly payment and five-year cost against the 20% scenario, plus the month PMI can be removed. In this illustration, 3% down reaches 80% of the original value around month 130 on scheduled payments alone.
2. FHA loans at 3.5% down
FHA loans are insured by HUD and accept lower credit scores than most conventional programs: 3.5% down generally requires a 580 score, and lower scores need more down. The trade-off is two mortgage insurance premiums (MIP): an upfront premium, currently 1.75% of the loan and usually financed, plus an annual premium billed monthly. As of 2026, confirm the rates on HUD’s site.
Illustration: a buyer with a 640 score buys a $350,000 home with 3.5% down ($12,250). The base loan is $337,750, and the financed upfront MIP of $5,911 makes it $343,661. At an assumed 6.00% FHA rate, P&I is about $2,060. Annual MIP at an assumed 0.55% adds about $155, for roughly $2,215 a month before taxes and insurance. The same buyer on a conventional loan at an assumed 6.25% pays P&I of about $2,080, plus PMI for a 640 score assumed at 1.75%, or $493. That totals about $2,573, which is $358 more.
Here the FHA loan wins on payment. With a 740 score, the answer often flips.
- Confirm the property meets FHA appraisal standards.
- Ask for an FHA versus conventional comparison with identical assumptions.
- Model MIP duration. With under 10% down, MIP generally lasts the life of the loan.
- Plan the refinance path out once equity builds.
The common mistake is treating FHA as a temporary loan without a plan to leave it. In this illustration, refinancing into a conventional loan with no PMI at 20% equity removes the $155 MIP. If the refinance costs $6,000, you break even in about 39 months.
What to measure: payment including MIP versus conventional, and that break-even month.
3. VA loans with zero down
VA loans let eligible service members, veterans, and surviving spouses buy with no down payment and no monthly mortgage insurance. The cost is a one-time funding fee. As of 2026, VA.gov lists it at 2.15% for first-use, zero-down purchases and 3.3% for subsequent use. Veterans receiving VA disability compensation, and certain surviving spouses, are exempt.
Illustration: a $400,000 purchase at $0 down. With the 2.15% fee ($8,600) financed, the loan is $408,600. At an assumed 6.00%, P&I is about $2,450 with no monthly mortgage insurance. A 5% conventional loan at an assumed 6.25% costs about $2,514 including PMI, and requires $20,000 down. If you are fee-exempt, the loan stays at $400,000 and P&I falls to about $2,398.
Entitlement matters if you have used it before. Second-tier (bonus) entitlement works like this: take the county loan limit, multiply by 25% for the maximum guarantee, subtract the entitlement already used, then multiply the remainder by 4 for your zero-down purchase limit. Using the 2026 baseline conforming limit of $832,750 (FHFA) as an illustrative county limit: 25% is $208,187.50. If $36,000 is still in use, the remainder is $172,187.50, and times 4 is $688,750.
- Pull your Certificate of Eligibility electronically; I need your SSN and date of birth to do it.
- Check funding fee exemptions against your VA disability letter.
- Compare rate and fee quotes across lenders.
The common mistake is forgetting the fee or missing an exemption worth thousands. What to measure: monthly payment and cash to close against the lowest-cost conventional alternative at the same rate.
4. USDA loans for eligible areas
Many buyers hear “USDA” and picture a farm. The program covers eligible suburban and small-town addresses, and it offers zero down for households within the income limit, which is generally 115% of area median income. As of 2026, the guarantee fees are typically 1% upfront and 0.35% annually, but confirm both with USDA.
Illustration: a $320,000 suburban home. With $0 down and a financed upfront fee of $3,200, the loan is $323,200. At an assumed 6.00%, P&I is about $1,938, and the annual fee adds about $94, for roughly $2,032 a month. An FHA loan at 3.5% down ($11,200) has a base loan of $308,800, and with the financed upfront MIP the loan is $314,204. P&I is about $1,884, plus about $142 in annual MIP, for roughly $2,026.
The monthly costs are nearly identical, yet USDA saves you $11,200 at closing. When the payments are that close, cash to close often decides it.
- Enter the specific address on the USDA eligibility map.
- Check household income against the limit for your household size.
- Compare guarantee fee cost against FHA and conventional.
The common mistake is ruling it out by assumption without entering the address. Eligible zones often surround mid-sized cities. What to measure: the eligibility result, then monthly cost including the annual fee against FHA.
5. Down payment assistance programs (Dynamo and Turbo DPA)
Down payment assistance (DPA) supplies funds for your down payment, and sometimes closing costs, alongside a first mortgage. Dynamo and Turbo DPA are programs Duane Buziak offers. Eligibility depends on income, credit, property, and the first-mortgage program, and each program’s second-lien terms differ.
Illustration, with assumed terms: you buy a $350,000 home and DPA covers the 3.5% down payment of $12,250 as a second lien. That leaves little to nothing out of pocket at closing, depending on closing costs and seller credits. Suppose the second lien is repayable at sale or refinance, and the first mortgage carries a rate 0.375 points higher than without DPA. On a $337,750 first loan, P&I rises from about $2,025 at 6.00% to about $2,107 at 6.375%, or $82 a month. That is $4,920 over five years, against $12,250 of cash you kept.
The trade can still be worth making, but only if you see both numbers.
- I confirm your eligibility and the program’s income and location rules.
- I match the DPA to a first-mortgage program that accepts it.
- Read the second-lien terms: interest, repayment trigger, forgiveness, and recapture.
- Model the payment with and without DPA at the quoted rates.
The common mistake is ignoring repayment or recapture. If you sell or refinance early, the second lien may come due. Do not assume terms from one program carry over to another.
What to measure: cash to close with and without DPA, and monthly cost including any rate increase.
6. Physician and doctor loans
Physician loans serve medical professionals who have high future income and heavy student debt. Duane Buziak offers this program, and typical features include low down payments, no monthly PMI at higher LTV, and flexible treatment of student loans. The cost is often a slightly higher rate, and terms depend on the investor.
Illustration: a new attending physician buys a $500,000 home with 5% down ($25,000), a $475,000 loan. Assume the doctor loan prices at 6.50% with no PMI, and the conventional alternative at 6.25% with PMI at 0.55%.
- Doctor loan: P&I about $3,002.
- Conventional: P&I about $2,925 + PMI $218 = about $3,143.
The doctor loan saves about $141 a month, or roughly $8,460 over five years. Its rate would have to be about 0.7 points higher than that before the conventional loan wins on payment.
- Verify your profession, license, and signed employment contract.
- Document each student loan’s balance, status, and payment, since lenders treat deferred and income-driven loans differently.
- Compare rate and PMI against a conventional quote.
The common mistake is assuming a doctor loan is always cheaper. If the rate premium is wide, or you could reach conventional PMI removal soon, the math can reverse. What to measure: five- to seven-year total cost against a conventional loan with PMI.
7. Comparison shopping, soft-pull pre-approval, and PMI removal
Every strategy above is only as good as the quotes behind it. A single-lender retail shop shows you its own product. A broker with access to hundreds of wholesale lenders can lay programs side by side, and a mortgage pre approval without hard pull lets you do that without stacking inquiries. A formal credit check still happens before closing, but the comparison stage can be soft.
The comparison table
Illustration on a $400,000 home, 30-year fixed, with assumed rates of 6.25% for conventional and 6.00% for government-backed loans. Fees and APR vary by borrower, so compare the APR on each Loan Estimate.
| Program | Minimum down | Down on $400,000 | Illustrative rate | Term | Insurance or fee | Monthly P&I plus insurance |
|---|---|---|---|---|---|---|
| Conventional (5% shown) | 3% to 5% | $20,000 | 6.25% | 30-year | PMI, removable | $2,514 |
| FHA | 3.5% | $14,000 | 6.00% | 30-year | 1.75% upfront, 0.55% annual | $2,532 |
| VA | 0% | $0 | 6.00% | 30-year | 2.15% funding fee, no monthly MI | $2,450 |
| USDA | 0% | $0 | 6.00% | 30-year | 1% upfront, 0.35% annual | $2,540 |
Total cost on one program
Take the 5% conventional loan. Suppose the home is in Henrico County, Virginia, where the real estate rate is $0.87 per $100 of assessed value (verify the current rate on the county’s official finance page before relying on it). On $400,000, that is $3,480 a year, or $290 a month. Add P&I of $2,340, PMI of $174, and insurance of $150, for $2,954 a month.
Over five years, with assumed closing costs of $10,000, the cost excluding equity is about:
- Interest: $115,057
- PMI: $10,440
- Property tax: $17,400
- Insurance: $9,000
- Closing costs: $10,000
- Total: about $161,897, while you build about $25,327 of principal equity.
PMI removal math
Under the Homeowners Protection Act, you can request cancellation at 80% of the original value, and servicers must cancel automatically at 78% (CFPB). On a $380,000 loan against a $400,000 value, 80% is $320,000, reached around month 120, and 78% is $312,000, around month 132. If the home appraises at $450,000 after five years, the balance of about $354,673 is 78.8% LTV, so you may qualify earlier, subject to lender rules. Either way you stop paying $174 a month.
- Start a soft pull mortgage broker pre-approval.
- Collect quotes for each eligible program on the same day, so rates are comparable.
- Fill in the five-year worksheet for each.
- Set a calendar reminder for the PMI cancellation month.
The common mistake is comparing only interest rates and ignoring APR, fees, and mortgage insurance. What to measure: the lowest five-year total cost across quotes and the projected month of PMI cancellation.
Where to start, and how to sequence the comparison
Start with item 7. A no credit hit mortgage application, meaning a soft-pull pre-approval, shows which of these programs you qualify for and lets me price them side by side. Next, check DPA eligibility, since it can change which first mortgage makes sense. Then choose by five-year total cost, not by the smallest down payment or the lowest advertised rate.
Your dream home is within reach. Discover how much you could save with personalized mortgage rates tailored to your unique situation. Securely pre-qualify in minutes with no impact to your credit score and compare competitive offers from trusted lenders who are ready to help you save. Compare your options with Shop Mortgage Rates by Duane Buziak.

