Duane Buziak Explains 8 Types of Home Loan Programs and How to Compare Them in 2026

inline-1788519683439-veterans-united-screenshot-1788516380769.jpeg
Duane Buziak

Duane Buziak
Mortgage Maestro | NMLS #1110647 | Coast2Coast Mortgage LLC
Licensed mortgage broker serving Virginia, Florida, Tennessee, Georgia, Washington DC, North Carolina, South Carolina, and Maryland, specializing in VA home loans and first-time homebuyer programs.

Suppose you are buying a $400,000 home, and these are illustrations with assumed rates, not quotes. A conventional loan with 5% down at 6.50% runs about $2,560 a month for principal, interest and private mortgage insurance (PMI). An FHA loan at a lower 6.25% with 3.5% down runs about $2,595, because the 1.75% upfront premium is financed and the annual premium is higher. A VA loan at 6.00% with nothing down runs about $2,450, with no monthly mortgage insurance. The lowest rate did not produce the lowest payment, and cash to close differs even more.

The program you choose sets your rate range, your mortgage insurance, your down payment and your closing costs before you compare a single broker. A soft credit pull mortgage inquiry lets you see these differences without a hit to your score. The eight programs below each work differently, so each needs its own test.

Duane Buziak, NMLS #1110647

1. Conventional Loans

Conventional loans follow Fannie Mae and Freddie Mac guidelines. Their central advantage is that PMI is priced on your credit score and can be cancelled, unlike mortgage insurance on some government loans.

Consider a labelled illustration: a buyer with a 740 score puts 5% down on a $400,000 home, borrowing $380,000. Suppose PMI is priced at 0.50% a year, or about $158 a month. An FHA loan at 3.5% down would carry annual mortgage insurance of about $177 a month on a $386,000 base loan, plus the financed upfront premium. The conventional buyer pays less each month, and the insurance is temporary.

It ends on a schedule. You can request removal at 80% of the original value, which here is a $320,000 balance. At 6.50% on scheduled payments alone, that takes roughly 124 months, just over ten years. Extra principal payments or documented appreciation shorten it. Servicers must terminate PMI automatically at 78% of original value. Many first-time buyers also qualify for 3% down programs.

To put this into practice:

  1. Check the current conforming limit for your county on FHFA.gov.
  2. Request a soft-pull quote so your score is not hit while you compare.
  3. Price PMI at 5%, 10% and 20% down, since the premium drops sharply as the loan-to-value falls.

The common mistake is assuming 20% down is mandatory, which sends buyers into years of waiting. The second mistake is ignoring how much PMI pricing depends on your score. Moving from the 660s to the 740s can cut the premium substantially.

Measure the total monthly payment including PMI, and the month PMI can be removed. If you later take cash out on a conventional loan, the maximum is 90% loan-to-value.

2. FHA Loans

FHA loans are insured by HUD and allow 3.5% down with a qualifying credit score. The trade-off is two mortgage insurance premiums: an upfront premium financed into the loan and an annual premium paid monthly. FHA is not only for bad credit, but it often wins where scores sit in the 600s and conventional PMI becomes expensive.

Take a 660-score buyer on a $400,000 home, again as an illustration. Suppose conventional pricing is 6.875% with 1.2% annual PMI on a $380,000 loan: about $2,496 plus $380, or $2,876 a month. FHA at 6.25% on a financed $392,755 loan, with about $177 of annual premium, is about $2,595. The gap is roughly $281 a month, or about $23,600 over seven years. The FHA balance is also about $12,755 higher at the start, and that belongs in the comparison.

The premium also lasts longer than most buyers expect. As of 2026, with less than 10% down, annual MIP generally runs for the life of the loan. With 10% or more down, it runs 11 years. Confirm current rates and limits on HUD.gov.

The steps:

  1. Confirm the current upfront and annual MIP rates for your loan amount and term.
  2. Model the FHA and conventional loans side by side with the same property tax and homeowners insurance.
  3. Decide whether a refinance into conventional is realistic if your score improves, and what it would cost.

The mistake is overlooking MIP duration. A cheap first year does not make a cheap loan if you cannot remove the premium. Measure five-year and seven-year total cost against conventional, including the remaining balance, not just the payment.

3. VA Loans

For eligible veterans and service members, VA loans allow zero down with no monthly mortgage insurance. In place of it, most borrowers pay a one-time funding fee, which can be financed.

Here is an illustration on a $400,000 purchase with nothing down. As of 2026, the first-use funding fee at zero down is 2.15%, or $8,600, so the loan becomes $408,600. At an assumed 6.00%, principal and interest is about $2,450. A veteran with a qualifying disability rating is exempt, so the loan stays at $400,000 and the payment is about $2,398, roughly $52 a month less. Confirm the current table on VA.gov.

The sequence:

  1. Pull the Certificate of Eligibility. Duane Buziak can retrieve the COE electronically with your Social Security number and date of birth.
  2. Check your funding fee tier and exemption status.
  3. Compare against a conventional loan with 5% down, with PMI included.

If you have used part of your entitlement, second-tier (bonus) entitlement may let you borrow above the basic amount. Take the county loan limit times 25%, subtract the entitlement already used, and multiply by four for the zero-down purchase limit.

The mistake is forgetting the funding fee, or never checking exemption status. A missed exemption can cost thousands. Measure cash to close and monthly payment against the closest conventional option. VA cash-out refinancing, a separate product, allows up to 100% loan-to-value.

4. USDA Loans

USDA guaranteed loans offer zero down for properties in eligible areas, with a cap on household income. The eligible map covers more than farmland: it includes many small towns and some suburban edges of metro areas.

Imagine a family house hunting just outside a metro area. They assume the address is out of range, then look it up and find it inside the eligible boundary. Their household income falls under the limit for their size. They can buy with nothing down.

Pricing works like FHA’s, with lower fees. As of 2026, the guarantee fee has been 1.00% upfront and 0.35% annually, but confirm both with the USDA program page. On a $300,000 home, the financed loan is $303,000 and the annual fee is about $88 a month. An FHA loan with 3.5% down on the same home would carry annual MIP of about $133 on a $289,500 base loan.

To put this into practice:

  1. Enter the property address in the USDA eligibility tool.
  2. Check the income limit for your household size and county.
  3. Price the guarantee fees alongside FHA and conventional.

The common mistake is assuming only farms qualify, so buyers never run the address. The reverse error is falling in love with a home before checking it, since eligibility is decided by the specific address. Measure the monthly payment with the USDA annual fee against FHA MIP, and cash to close with zero down against your other options.

5. Jumbo Loans

A loan is jumbo when it exceeds the conforming limit for the county. Because these loans fall outside agency guidelines, lenders set their own rules, typically requiring higher credit scores and cash reserves.

Consider a $950,000 purchase with 10% down, a loan of $855,000. As of 2026, FHFA’s baseline limit is $832,750, so in a baseline county this is jumbo. In a high-cost county where the limit is higher, up to $1,249,125, the same loan is conforming and priced on agency terms. In the baseline county, putting down about $117,250 would bring the loan to the limit. Verify the current figures for your county on FHFA.gov.

The mistake is treating one lender’s rules as universal. Jumbo guidelines vary on reserves, debt-to-income, and how they count assets and bonus income, so a rejection from one source says little about the next.

Work through it this way:

  1. Look up the county limit and see how far over it your loan sits.
  2. Gather reserve documentation: statements for savings, brokerage and retirement accounts.
  3. Compare multiple wholesale lenders at the same loan-to-value, which is where an independent broker earns its keep.

Measure the rate and fee difference across several quotes at identical loan-to-value and credit assumptions. Spreads between jumbo programs can be wider than in the agency market. Also test whether a slightly larger down payment turns the loan conforming and changes the pricing.

6. Physician/Doctor Loans

Doctor loans are profession-based programs. They typically treat student debt and a signed employment contract more flexibly than standard underwriting, which matters for a resident or new attending whose income has not yet appeared on a tax return. Duane Buziak offers this program, and current terms are confirmed at quote time because they change.

Take a labelled illustration: a resident with a signed contract and heavy student debt buys a $400,000 home. A conventional loan with 5% down needs $20,000 plus PMI, about $2,560 a month at the earlier assumptions. A doctor loan with nothing down at an assumed 6.75% is about $2,594, with no PMI. The buyer keeps $20,000 in cash for roughly $34 more a month. That may be worth it, and the comparison shows it rather than guessing.

The common mistake is focusing only on the low down payment and not comparing the rate. A rate premium compounds over a long hold, and a conventional loan may fit once the contract income is counted.

The steps:

  1. Gather the employment contract, start date and loan statements, including any deferred or income-driven repayment documentation.
  2. Confirm program terms: eligible professions, maximum loan amount, down payment and reserves.
  3. Price the doctor loan against conventional and, if you qualify, other programs.

Measure cash to close, monthly payment, and total cost over the hold period you expect. If you plan to stay three years during training, the numbers differ from a ten-year hold.

7. Non-QM and DSCR Loans

Non-QM loans qualify borrowers outside standard documentation, such as the self-employed whose tax returns understate cash flow. DSCR loans go further for investors: the property’s rent against its payment decides approval, not the borrower’s personal income.

Illustration one: a self-employed borrower qualifies on 12 months of bank statements. Illustration two: an investor with a property renting for $2,600 a month, against a $2,400 payment covering principal, interest, taxes, insurance and association dues. The debt service coverage ratio is 2,600 divided by 2,400, or about 1.08.

The cost is a rate premium. On $300,000, an assumed 7.50% against 6.50% for an agency loan is about $2,098 against $1,896 a month, a $201 difference. The common mistake is using non-QM when an agency loan would be cheaper, for example because the self-employed borrower’s tax returns would actually qualify.

To put this into practice:

  1. Collect 12 to 24 months of bank statements, or the lease and rent documentation.
  2. For owner-occupied loans, review the CFPB ability-to-repay rules, which still apply even without qualified mortgage status. Business-purpose investor loans are generally treated differently.
  3. Ask about prepayment terms, since DSCR loans often carry a penalty if you refinance or sell early.

Measure the rate premium versus the closest agency alternative, and weigh it against how long you will hold the loan.

8. Down Payment Assistance Programs

Down payment assistance (DPA) is not a loan type by itself. It layers grants or second liens on a primary mortgage to cover part of the down payment and closing costs. Dynamo and Turbo DPA are available through Duane Buziak, and eligibility and terms vary by program. DPA is not free money: some programs are forgiven over time, while others are repaid on sale or refinance.

Imagine a first-time buyer on a $350,000 home using DPA for 3%, or $10,500. Suppose the first loan is $339,500 at 6.75% instead of 6.50% without DPA. Principal and interest rises from about $2,146 to $2,202, roughly $56 a month, or about $4,700 over seven years. If the assistance is a repayable second lien, the $10,500 comes due later. If it is forgiven on schedule, it does not.

The common mistake is overlooking the rate impact or the lien repayment terms. A buyer who sees only cash saved can miss a rate bump or a payoff due at sale.

Work through it this way:

  1. Confirm eligibility: income, purchase price, location and first-time buyer status where required.
  2. Get the lien terms in writing: interest, forgiveness schedule, and what triggers repayment.
  3. Model total cost of ownership with and without assistance.

Measure cash saved at closing against the extra monthly cost or repayment obligation. If the second is larger over your hold period, the assistance may not be worth taking.

Eligibility first, total cost second: how to sequence the comparison

Start with the programs that gate on who you are or where you are buying: VA, USDA and DPA. If you qualify, they often change the math most. Then run a total-cost comparison on the top two or three, counting payment, mortgage insurance, cash to close and the balance you will still owe after your expected hold. Rate alone settles nothing.

That is the idea behind Don’t Guess Your Rate, Shop It. A soft pull mortgage broker can run a no hard inquiry mortgage pre approval and set options side by side across hundreds of wholesale lenders, so you are not limited to one shop’s product list. Your dream home is within reach. Discover how much you could save with personalized mortgage rates tailored to your unique situation. Securely pre-qualify in minutes with no impact to your credit score and compare competitive offers from trusted lenders who are ready to help you save. To talk it through with Shop Mortgage Rates by Duane Buziak, call 804-212-8663 and compare your options.